Table of contentsIntroduction
Welcome to the Eden Build Guide! This comprehensive guide will take you through the step-by-step assembly process for the Eden, a keyboard designed by Kai. Ensure you have all the required components from the packing list before initiating the assembly.
Disclaimer:
1)Note that the raw copper weight included in this kit is intended to oxidize over time, and this aging process is intentional for a unique aesthetic.
2) You need a plate to use O-Ring mount and only clip-in, PCB mounted stabilizers are compatible with O-Ring mount. We highly recommend TX AP Stabilizers. Screw-ins work fine for all other mounting methods.
**3) The PCB has 6.26u ANSI bottom row support but the alu plate only supports 7U Tsangan bottom row.
Join the other Eden owners,** join the conversation on Discord.
Stay up to date with Kai, follow us on Instagram.
Layout: 60%, WK, plate supports 7U only
Mounting: Plateless/Plate Tadpole, Gummy O-Ring, Top
Materials:
Case: 6063 Aluminum (Anodized) Weight: Raw Copper, Black Coated Brass Weight
Colors:
Typing Angle: 5 degrees
EKH: 23.6mm